Complete Bolt on ITB kit for M50/52 & S50/52(USA) BMW
This is a complete bolt on kit that will fit ALL m50/52 and USA Spec S50/52 bmw engines. Kit is supplied with standard m50 throttle cable attachment that will fit both LH and RH drive vehicles
All our testing has shown this kit to produce peak gains of up to 20rwHp over the standard intake on an unmodified engine. This is not just gains to the top end but little to no losses to the lower and mid range. When combined with other engine modifications these gains can be expected to increase a lot further.
This kit is supplied with 45mm TB size with matching manifold and our testing has shown this is capable of producing maximum power for all engines from standard 2.5L right up to highly modified racing engines.
Kit comes with all the fittings and parts required to install including a complete idle control valve circuit
Includes our carbon fiber finish airbox plenum. We have seen dyno results showing small power gains with the plenum fitted over open trumpets but most importantly this will allow cold air from the headlight area to enter the intake which will bring real world power gains on the road or track, while also allowing for the fitment of air filtration.
The kit can be installed and used effectively while still retaining the factory engine management ECU by installing the MAF sensor directly to the Plenum, however some specialized ecu tuning is IS required. Use with stand alone ECU is ideal.