Cart

  • Blog

    BMW M44 ITB INSTALL

    With the help of Haydn the owner of this car we did a lot more research and development than usual on this kit design, lots of flow simulations and calculations were made on every component from the manifolds to the airbox and once again the results speak for them selves. By fitting the MAF sensor…
    Read more

    BMW M40 4 CYLINDER MOTOR

    The BMW M40 is an inline-four SOHC piston engine which replaced the M10 and was produced from 1987–1995 which replaced the M10
    Read more

    ITB INSTALL TO STANDARD 2.5L BMW 325I ENGINE

    This is here to show the power gains made by fitting a set of 40mm ITB intakes to a standard 2.5L 6 cyl engine with no other modifications, note the gains made to the mid and lower rpm range. To drive this car the transformation was quite impressive. Build sheet Owner            Matt Engine            M20 BMW…
    Read more

    BMW 3625CC STROKER M30 RACE ENGINE

    Build sheet Owner                Chris Engine                 3625cc M30 Bmw inline 6cyl 2 valve bore/stroke        93.5/88 comp.                 12.8:1 Head                  RHD developed, extensive port modifications, custom SS valves 48/37 Cam                   Custom profile 310 duration, 12.4mm lift Exhaust             Generic aftermarket headers Intake                S38/ M5 46mm…
    Read more

    BMW M30 TURBO CLASSIC 635

    Owner         Andrew Car               BMW 635i Engine        3.5L 6cyl  m30 Pistons       Low comp forged Ross Rods           S38 BMW 144mm Head           Std valves and cam, mild porting Turbo         Garrett  GT35 Intake        Custom Aluminium Exhaust      RHD custom  stainless ECU              EMU This is anther build in progress of a turbo m30 street engine for Andrews classic red 635
    Read more

    M20 LOW COMPRESSION 2.7 STROKER ENGINE

    Build sheet Owner                 Nick head                    731 with 42mm intake valves fitted (std 885 head) and Rhd porting Cam                     custom low comp grind 272 duration 11mm lift Bottom end         Stock low compression eta 2.7, 135mm rods, 8.5:1 pistons Intake          …
    Read more

    RHD’S 293RWHP 2.9L RACE ENGINE

    Bmw M20 engine 2940cc Bmw M20 engine 2940cc, RHD developed and built head, RHD roller cam, RHD ITB intake and Stainless exhaust Build Sheet Vehicle                  1981 E21 323i BMW Improved Production Circuit Race Weight                   1050Kg Engine                    2Valve Inline 6 Cyl  2940cc Fuel                        Premium Pump Fuel Ignition                   MSD  Dis-4 CDI 3 x duel coil…
    Read more

    LIST OF BMW ENGINES

    BMW has produced automotive petrol/gasoline engines in the following layouts: inline-four (straight four) and V8.
    Read more

    BMW RALLY RACING

    A minimum of two functional brake lights in their approximate stock locations is required on all cars competing in the Trans-Am
    Read more

    SHIPPING AND PRICING POLICY

    Shipping Most of our products are shipped directly from international sites using Express International EMS services. All shipping is calculated by weight. Minimum weight threshold is 500g and every parts is accurately listed in our webstore so that you will only pay for the exact combined weight of your order.   Pricing Even though RHD…
    Read more

    Show Buttons
    Hide Buttons