BMW M44/M42 Intake Manifold E30/E36

Description

BMW M44/M42 Intake Manifold Front Entry Turbo/NA

At RHD we are all about performance! Following the development and success of the popular M44/M42 ITB kit we have used that experience to produce this light weight high performance single throttle intake. We tested various plenum designs and trumpet lengths during development and the results are impressive. Expect up to 20Hp increase in power on any NA engine with little to no loss to torque. Turbo engines will see this gain multiplied substantially!

We offer this product with 2 different length trumpets. As expected both versions offer similar peak power with the longer version producing slightly better torque.

E30 only the short version is direct fit (long version requires slight booster modification)
E36 long or short version is direct fit

True carbon-fiber construction plenum, rated over 6bar boost
6061 Aluminum bullet trumpets, flanges and backing plate.
Assembly sealed with O-Rings
Front flange can be rotated to optimize throttle body position
Drilled for direct fitment of M50/52 throttle body OR Bosch 68mm DBW throttle body.
Fits LH and RH drive vehicles
Includes Air Temp Sender and multiple fittings for ICV, brake booster MAP and BOV
Takes standard e36 m44 or m42 fuel rail
Option for black or silver flange and base plate.
NOTE: all short trumpets are silver and all long trumpets are black.

Lastly for those wanting ITB turbo, our independent throttles and linkage can all be directly assembled to these parts!!